caparol_pim_import/caparol_de/products/image/183651/055315_Capatect-Dehnfugenprofile_Plus_6660,_6670_RU.png

Capatect Dehnfugenprofil 6660 und 6670

Special joint sealing profiles with white joint-bridging loop, glass fabric strips and plastic cover

LV Texte

Field of Application

To form vertical expansion joints in the Capatect ETICS✱ systems A and B.
✱ETICS = External Thermal Insulation Composite System
  Brit. term: EWI = External Wall Insulation
  Am. term: EIFS = External Insulation and Finish System

Type E: For flush joints
Type V: For joints in internal corners

Material Properties

  • Expansion joint may be formed akurat
  • Weather resisrant
  • UV resistant
  • Recoatable
  • Economic application in one operation
  • Suitable for all insulation thicknesses
  • With 1 gauge (Typ V) or two gauges (Typ E) for the following coatings
  • Variable used for joint widths from 5-25 mm
  • 10 cm wide reinforcing fabric strips on both sides

Packaging/Package Size

Unit length 250 [ cm ]
Carton with 25 units / 62.5 [ m ]

Storage

Horizontally, tensionless, protected from continuing solar irradiation, heating and mechanical stress and moisture.

Product No.

Typ E = 6660/00
Typ V = 6670/00

Substrate Preparation

ETICS does not bridge expansion joits of buildings.
These joints have to be taken over into the insulation and all following coats. For functional and optical reasons the flanks of joints should be  carried out carefully. For use of Capatect- Dehnfugenprofil "Plus" 6660 and 6670 set flank distances in minimum 5 mm and maximum 25 mm

 

Method of Application

Expansion joints (type E or type V) have to be carried out before applying the reinforcing layer.
Apply reinforcement mortar on both sides of the joint about 15  cm wide spreaded over the insulation boards. Embed the fabric strips into the fresh reinforcing mortar. Take excess mortar of and smooth to avoid a piling on.

Recommendation:
To ensure a uniform joint widths, insert a strip of polystyrene or comparably as spacer. This also prevents contamination of the joint profile while the following coatings are carried out. Separate the spacer carefully from each coat before curing. Remove the strip after completion of work. 

Consumption

per m: 1.0 [ m ]

Application Conditions

See Technical Information of the used reinforcement mortar.

Disposal

Dispose materials and all related packeging in a safe way in accordance with the full requirements of the local authorities.

Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.

For EU: Dispose material residues as per EWC (European Waste Cataloque) 101103 (old glas fibre materials) or according to EWC 170904 (mixed construction and demolition waste).

Customer Service Centre

Tel.: +49 6154 71-71710
Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de

International Distribution: Please see www.caparol.com