caparol_pim_import/caparol_de/products/image/202630/059195_Capatect_Buntstein-Sockelputz_691_ohne_Farbton.png

Capatect Buntstein-Sockelputz 691

Exposed aggregate render - coloured stone finish
for exterior and interior use; acrylic binder

LV Texte

Ready-to-use exposed aggregate rendering with colour-coordinated natural stone granules (stone finish).

Field of Application

Render finish for wall plinth of Capatect ETICS✱ or Capatect-VHF (ventilated cladding), plinth on uncoated concrete, on base coats of mortar classes P II to P V as per DIN 18 550, on gypsum plasterboards.
✱External Thermal Insulation Composite Systems
Amer. term: EIFS; Brit. term: EWI

Material Properties

  • Structural particles: Colorite quartz granules
  • Binder: Pure acrylate
  • Graded, light-fast combination of binder and granular material
  • Good adhesion to substrates
  • Shock-proof
  • Weatherproof
  • Water vapour permeable
  • Easy to clean
  • Scrub-resistant as per DIN 18 363 (VOB, C)
  • Highly resilient
  • Easy to apply
  • Delutable with water

 

Packaging/Package Size

25 kg bucket

Colours

01: grey     02: Irish green     03: flint red     04: anthracite    05: vesuvian grey
06: rosato quartz     07: pebble grey;    08: pebble colour

Gloss Level

Silk-matt

Storage

Cool, but frost-free and protected against direct sunlight

Maximum particle (grit) size

2.0 mm, natural stone grain structure

Diffusion-equivalent air layer thickness sdH2O

on substrate Capatect 190: sd < 0.6 m

Apparent density of hardened mortar

approx. 1.5 kg/dm3

Coefficient of water absorption

w < 0.2 kg/(m2 · h0,5) as per DIN 52617

Consistency

Paste-like

Structure / Texture

Natural stones

Product No.

691

Suitable Substrates

Reinforcement layers of Capatect ETICS or Capatect-VHF (ventilated cladding), plinth on uncoated concrete, on base coats of mortar classes P II to P V as per DIN 18 550, on gypsum plasterboards.
Allow the reinforcement layer of Capatect  ETICS to cure before applying Capatect 691 on wall plinth.
Allow new base renders to cure for at least 2 – 4 weeks.

Substrate Preparation

The substrate must be even, clean, dry, solid, stable, free from brittle and loose materials, dust, oils, fats and greases or other materials that may prevent good adhesion.If necessary apply a priming coat onto existing plasters to solidify the substrate or to equalize the absorbency of the surface.

Method of Application

Apply Capatect 691 by stainless steel trowel uniformly onto the entire surface of cured base coat (avoiding overlapping), then immediately rub down to the particle size and smoothen.Recommendation: Allow the material to dry slightly on its surface, then smoothen again with a clean stainless steel trowel.

Being natural products, the granules used in Capatect 691 may occasionally cause slight differences of shade in the finished coating. Use only material marked with identical batch numbers or, if utilising material from different batches, mix the entire quantity needed in advance.Remove masking tapes after application – prior to the beginning of hardening.

Surface Coating System

Prime the substrate with Putzgrund 610, ready-mixed ex works, tinted via ColorExpress  or with AVA Amphibolin colourants (see table).
Tinting guide of priming coat Putzgrund 610
Colours of Capatect
Bunstein-Sockelputz 691		ColorExpress CollectionAVA: required quantity of pigment pastes
per kg Putzgrund 610
[ ml ]
blackochrereddish browngreen
01 grau
(grey)		Capatect 69187722220-
02 irischgrün
(Irish green)		10101750-74
03 flintrot
(flint red)		only tintable
ex works		81232566954-
04 anthrazid
(antracite)		4570202101-
05 vesuvgrau
(vesuvian grey)		Capatect 6915389223-
06 rosatoquarz
(rosato quartz)		2031784530-
07 kieselgrau
(pebble grey)		76061--
08 kieselbunt
(pebble colour)		11501180-210

Consumption

approx. 5.0 kg/m2 plus spill and loss

Application Conditions

Processing temperature: + 5 °C to + 30 °C during the application and curing for material, substrate and ambient air.
Do not apply under direct sunlight or during strong wind, fog or high relative humidity.

Site protection: If necessary, use tarpaulins as a protection against rain during the application and curing process.

Drying/Drying Time

At 20 °C and 60 % RH the render is surface-dry after approx. 3 – 4 days and thoroughly hardened - ready for stress - after approx. 6 – 8 days.

The render cures physically, i.e. by film forming of the emulsion and by evaporation of water. Lower temperatures and a high relative humidity extend the hardening process.

Tool Cleaning

Immediately after use with water.

Material Preparation

Stir the content of a Capatect 691 bucket thoroughly with a suitable low-speed electrical paddle. The material may be adjusted to working consistency with max. 2% of tap water.

Note

Do not apply on horizontal surfaces subjected to rain and moisture.
Follow relevant national regulations and guidelines.
Germany: DIN 18 363 (VOB, part C).

Please Note (Status as at Date of Publication)

Keep out of reach of children. Ensure good ventilation during use and drying. Do not eat, drink or smoke while using the product. In case of contact with eyes or skin, immediately and thoroughly rinse with water. Do not allow product to enter drains, waterways or soil. Clean utensils immediately after use with soap and water. Do not breathe spray dust. Use A2/P2 combination filter for paint spraying. Contains 2-methyl-2H-isothiazol-3-one.  May produce an allergic reaction.

Disposal

Materials and all related packaging must be disposed of in a safe way in accordance with the requirements of the local authorities.Particular attention should be made to re-moving wastage from site in compliance with standard construction site procedures.In Germany/EC: Only completely emptied, clean containers should be given for recycling. Dispose of liquid material as residues of water based paints.Dispose of dried material as residues ofhardened paints or via domestic waste.
EWC 08 01 12

Risk and Transportation Markings

See Safety Data Sheets (MSDS)

Product Code Paints and Enamels

BSW20 (M-DF02)

Customer Service Centre

Tel.: +49 6154 71-71710
Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de

International Distribution: Please see www.caparol.com

Product recommendation:

Details

PutzGrund 610