Capacryl Spray-TEC Satin

Water-dilutable, airless spraying applied finishing enamel
for interior an exterior use.

Downloads

Field of Application

High-quality enamel, in particular for airless spray application for interior and exterior use.

Material Properties

Maximum process safety for spraying
High filling power
High stability up to 250 µm wet film thickness.
Excellent opacity (hiding/covering power)
Non-blocking
Low odour
High impact strength and shock resistance

Material Base / Vehicle

Polyurathane-modified acrylic dispersion

Packaging/Package Size

Standard colour (White):
2,5 litres, 5 litres

ColorExpress:
2,35 litres, 4,7 litres

Colours

White

ColorExpress: Tintable via the ColorExpress tinting & mixing machine system in various colour shades of Caparol 3D System colour collection and colour shades of other collections.

Gloss Level

Silk-matt / satin-finished

A product typical pigment abrasion of silk-matt painted surfaces may occur at the beginning (temporary effect) with dark or intensive colours.

Storage

Keep in a cool, but frost-free place.

Density

Approx. 1.3 g/cm²

Suitability according to Technical Information No. 606 Definition of Application Areas

Interior 1	Interior 2	Interior 3	Exterior 1	Exterior 2
+	+	+	+	+
(–) inapplicable / (○) of limited suitability / (+) suitable

Suitable Substrates

Primed wood and derived timber products, primed and dimensionally stable metal surfaces, stable existing coatings interior and exterior, primed with wash primer, e.g. in combination with Capacryl Haftprimer.

Substrate Preparation

Sand and clean the primered surfaces.

Preparation of Material

Stir well before use. Spray preferably undiluted or diluted to a max. of 5 % with tap (potable) water, if necessary.

Method of Application

Advice for Spray Application:

	Ø Nozzle	Pressure	Dilution
Airless	0,010-0,014 inch	180 - 200 bar	Undiluted or diluted to a max. of 5 % by volume with tap (potable) water

Note: Dilution reduces the stability and filling capacity.

Thinning

Spray preferably undiluted or diluted to a max. of 5 % with tap (potable) water, if necessary.

Surface Coating System

Substrate	Use	Substrate Preparation	Impregnation	Priming Coat	Intermediate Coat (if necessary)	Finishing Coat
Wood, derivative timber products	Interior	Sand/clean	-	Capacryl Holz-IsoGrund	Capacryl Spray-TEC Filler	Capacryl Spray-TEC Satin
Dimensionally stable wood	Exterior	BFS No. 18	Capacryl Holz SchutzGrund	Capacryl Holz-IsoGrund	Capacryl PU-Vorlack
Iron, steel	Interior	Derust/clean	-	Capalac AllGrund	Capacryl Spray-TEC Filler
Iron, steel	Exterior	Derust/clean	-	2 x Capalac Allgrund	Capacryl PU-Vorlack
Zinc, galvanised surfaces	Interior	BFS No. 5	-	Capacryl Haftprimer	Capacryl Spray-TEC Filler
Zinc, galvanised surfaces	Exterior	BFS No. 5	-	Capacryl Haftprimer	Capacryl PU-Vorlack
Aluminium and Copper	Interior	Aluminium: BFS No. 6 Copper: clean with water, wetting agend an sanding pad	-	Capacryl Haftprimer	Capacryl Spray-TEC Filler
Aluminium and Copper	Exterior		-	Capacryl Haftprimer	Capacryl PU-Vorlack
Sound existing paint coatings¹⁾	Interior	Sand slightly/treat slightly with alkali	-	Capacryl Haftprimer	Capacryl Spray-TEC Filler
Sound existing paint coatings¹⁾	Exterior	Sand slightly/treat slightly with alkali	-	Capacryl Haftprimer	Capacryl PU-Vorlack

¹⁾ Prepare and prime damaged spots according to the respective substrate requirements.
Note: Adhesion must be tested in advance for powder coatings, coil coatings and other critical substrates by trial coating.

Consumption

Approx. 200 ml/m² at 180 µm wet film thickness.
Consumption is a guide value and may vary, depending on the nature of substrates and substrate condition.
Determine the exact amount of material required by coating a test area on site.

Application Conditions

Lower Temperature Limit for Application and Drying:
Min. +10 °C for product, substrate and ambient air.
Relative humidity must not exceed 70 %.

Drying/Drying Time

At 20 °C and 65 % relative humidity	dust dry	recoatable
Drying times¹⁾	approx. 60 minutes at 180 µm wet film thickness²⁾	approx. 6-8 hours

¹⁾ Lower temperatures and higher humidity extend the drying time.
²⁾ Higher wet film thickness extend the drying time.

Tool Cleaning

Immediately after use with water.

Please Note (Status as at Date of Publication)

This product contains max. 30 g/l VOC. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Contains 1,2-benzisothiazol-3(2H)-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1). May produce an allergic reaction. Disposal: Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local, regional, national and international authorities. Please

Disposal

Materials and all related packaging must be disposed of in a safe way in accordance with the full requirements of the local authorities. Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
In Germany: Only completely empty containers should be handed in for recycling. Dispose containers with residues of liquid product via waste collection point accepting old paints and enamels. Dispose dried/hardened product residues as construction site/demolition/municipal or domestic waste.

EU limit value for the VOC content

of this product (category A/d): max. 130 g/l (2010). This product contains max. 130 g/l VOC.

Giscode

BSW20 (Germany)

Product Code Paints and Enamels

M-LW01 (Germany)

Substances of Content - Declaration

polyacrylic resin, inorganic and/or organic pigments water, glycol ethers, ester alcohol, additives, preservatives

Customer Service Centre

Tel.: +49 6154 71-71710
Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de

International Distribution: Please see www.caparol.com