Field of Application
For high-quality coatings in areas with increased hygiene requirements, such as care facilities, clinics, hotels, restaurants, schools and daycare centers.
PremiumCare 2K-Lack is a construction coating for non-traffic, vertically applied building material surfaces in building construction. It is not intended for use on sports equipment, toys, furniture, vehicles, ships/boats, machinery, plant and the like. The suitability for this must be checked in each individual case. Applicable for exterior and interior use.
Material Properties
- Antibacterial and antiviral effect
- Disinfectant resistant
- Very good cleanability
- High scratch and impact resistance
- Block resistant
- Noble lacquer finish
- Very good chalking resistance
- Weather resistant
- Hand perspiration resistant
Material Base / Vehicle
Two-component acrylic polyurethane paint, water-thinnable
Packaging/Package Size
Standard goods:
750 ml, 2.5 ltr. (each incl. hardener).
ColorExpress (base white):
750 ml, 2.5 ltr. (each incl. hardener)
Colours
White
Other color shades can be tinted via ColorExpress.
Color fastness according to BFS Leaflet No. 26
Binder: Class A
Pigmentation: Group 1 to 3
Gloss Level
Semi-gloss
Storage
Please store in a cool place and keep containers tightly closed.Density
approx. 1.2 g/cm³Dry temperature resistance
max. 120 °CNote
Chemical resistance based on DIN EN ISO 12720 at 20 °C | ||
Test substance | Reaction time | Rating |
Acetone | 10 s | slight change |
Butylacetat | 10 s | slight change |
Isopropanol | 2 min | slight change |
White spirit | 10 min | slight change |
Ammonia | 10 min | slight change |
Potash lye | 1 h | slight change |
Skin protection cream | 1 h | no change |
Edible vinegar | 1 h | no change |
Ethanol | 1 h | slight change |
Cleaner | 1 h | no change |
Lactic acid | 1 h | no change |
Super gasoline | 1 h | moderate change |
Phosphoric acid | 1 h | no change |
Biodiesel | 1 h | slight change |
Hand sweat | 1 h | no change |
Red wine | 6 h | moderate change |
Mustard | 6 h | moderate change |
Coffee | 16 h | moderate change |
Water | 16 h | no change |
Cola | 16 h | no change |
Explanation: No change = The test surface cannot be distinguished from the adjacent surrounding surface. Slight change = The test surface differs from the surrounding surface only when a light source is reflected, e.g. by discoloration, change in color or gloss. No change in surface structure, e.g. due to swelling, cracking or blistering. Moderate change = The test surface can be distinguished from the surrounding surface, e.g. by discoloration, change in color or gloss. No change in surface structure, e.g. due to swelling, cracking or blistering. Cleaning recommendation: For occasional surface cleaning, standard household aqueous cleaning agents that are not dyed are suitable in conjunction with a soft, clean microfiber cloth. Before cleaning for the first time, the corresponding cleaning agent should be tested for compatibility with the coating system on a less visible area. Follow the dosage instructions for the cleaning agents and do not use abrasive products. In the case of tinted goods, a slight pigment abrasion may become visible on the cleaning cloth, depending on the color shade and cleaning intensity. |
Use in hospitals: Before possible use in hospitals, the use of PremiumCare (active ingredient silver) should be coordinated with responsible hospital personnel.
Suitability according to Technical Information No. 606 Definition of Application Areas
inside 1 | inside 2 | inside 3 | outside 1 | outside 2 |
+ | + | + | + | + |
(–) Not suitable / (○) Limited suitability/ (+) suitable |
Suitable Substrates
Suitable for primed building material surfaces such as dimensionally stable wood components, wood materials, steel, galvanized steel, zinc sheet, aluminum, copper, rigid PVC, load-bearing old coatings in exterior and interior areas.
Do not coat the following surfaces with PremiumCare 2K-Lack:
Stainless steel, anodized aluminum, bronze, brass, surfaces exposed to continuous wetness such as showers and swimming pools. Roof surfaces, floors, balcony floors, surfaces subject to traffic. Limited and not dimensionally stable wood components.
Wood-based panels and plywood panels (e.g. laminated veneer lumber) in exterior areas.
Substrate Preparation
Sand and clean the primed surfaces.
Preparation of Material
Add the hardener to the base compound immediately before processing. Mix intensively by hand or with a slow-running agitator (max. 400 rpm). Then transfer to another container and mix thoroughly again. The material temperature of both components should be 15 - 20 °C.
Sand and clean the primed surfaces.
Mixing Ratio
Base compound : hardener = 9 : 1 parts by volume or
Base compound : hardener = 100 g : 9.8 g parts by weight
Method of Application
PremiumCare 2K-Lack can be applied by painting, rolling or spraying. In particular, when spraying, observe the environmental and occupational health and safety regulations for handling coatings containing isocyanates. For brush application, use suitable aqua paint brushes such as Orel-Mix, Friess Blueline or Wistoba 1528 Krex. On larger surfaces, apply the varnish with a short-pile (textured) polyamide (nylon) roller and immediately finish with a fine-pored foam roller or an aqua varnish brush.
Instructions for spray application✱:
Ø Nozzle | Spray pressure | Air pressure | Dilution | |
Airless | 0,010 – 0,012 inch | 220 bar | – | – |
Airmix/Aircoat | 0,010 – 0,012 inch | 200 - 220 bar | 2,5 bar | – |
Caparol-NAST/Wagner XVLP FinishControl 5000/5500 | NAST-Frontend (Color: blue) | Air volume 2/3 bzw. 7/8 | _ | 10 % |
High pressure | 1,8 – 2,0 mm | – | 2,5 bar | 15 % |
Thinning
PremiumCare 2K-Lack is ready for application by brush and roller. Thinning with water is not necessary.
For spray application, dilution with potable water is possible depending on the equipment and spraying method.
Surface Coating System
Substrate | use | Substrate- | Impregnation | Primer coating | Intermediate | Final |
Wood, wood-based materials | interior | grind/clean | – | Capacryl Holz-IsoGrund 2) | PremiumCare 2K-Lack | PremiumCare 2K-Lack |
Dimensionally stable wooden components | outside | BFS Nr. 18 | Capacryl Holz SchutzGrund | Capacryl Holz-IsoGrund 2) | ||
Iron, steel | interior | derust/clean | – | Capalac 2K-EP-Haftgrund or Disbon 481 EP-Uniprimer | ||
Iron, steel | outside | derust/clean | – | Capalac 2K-EP-Haftgrund or Disbon 481 EP-Uniprimer | ||
Zinc | interior/outside | BFS Nr. 5 | – | Capacryl Haftprimer | ||
Aluminum/copper | interior/outside | BFS Nr. 6 | – | Capacryl Haftprimer | ||
Rigid PVC | interior/outside | BFS Nr. 22 | – | Capacryl Haftprimer | ||
Sound old coatings 3) | interior/outside | grind | Prepare and prime damaged areas according to the respective substrates | Capacryl Haftprimer |
1) According to BFS Leaflet No. 18, two intermediate coats are required on dimensionally stable wood components. |
Consumption
Approx. 100 - 120 ml/m2
The consumption values are guide values which may vary depending on the substrate and substrate properties. Exact consumption values can only be determined by prior test coatings.
Workability
2 hours at 20 °C.
Higher temperatures shorten, lower temperatures extend the pot life.
Caution. The end of the pot life is not recognizable. Exceeding the pot life as well as over- or undercuring (too much, too little or no hardener added) leads to drastic limitation of the product properties.
Application Conditions
- Material, circulating air and substrate temperature: min. 5 °C (favorable range: 10 to 25 °C)
- Relative humidity: ≤ 80%
Drying/Drying Time
At 20 °C and 65 % relative humidity. | dust-dry | paintable | dried through |
After hours | 1 – 2 | 10 – 12 | 48 |
Tool Cleaning
Clean tool after use with water and wetting agent, e.g. Gescha Multi-Star. It is recommended
the wearing of nitrile gloves.
Special Risks (Hazard Note) / Safety Advice (Status as at Date of Publication)
Mass
May cause allergic skin reactions. If medical advice is needed, have container or label at hand. Keep out of the reach of children. Avoid inhalation of mist or vapor. Do not get in eyes, on skin or on clothing. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of soap and water. Caution. Spraying may produce hazardous respirable droplets. Do not inhale aerosol or mist.
Contains 1,2-benzisothiazol-3(2H)-one, 2-methyl-2H-isothiazol-3-one, reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1).
Advice for allergy sufferers: hotline 0800/1895000 (free of charge from a German landline).
Hardener
May cause allergic skin reactions. Harmful by inhalation. May irritate the respiratory tract. Harmful to aquatic organisms, with long lasting effects. Do not inhale vapor/aerosol. Do not get in eyes, on skin or on clothing. Use only outdoors or in well ventilated areas. Avoid release to the environment. Wear protective gloves/eye protection. If you feel unwell, call a POISON CENTER/doctor.
Contains hexane, 1,6-diisocyanate, homopolymer, polyethylene glycol mono-methyl ether-blocked. Contains isocyanates. May cause allergic reactions.
Advice for allergy sufferers: Hotline 0800/1895000 (free of charge from German landlines).
The product falls under the Regulations on Biocidal Products (EU) 528/2012 Biocide type: PT 2 -.
Disinfectants and algaecides not intended for direct use on humans and animals.
Expiry date: follow the instructions on the label. Active ingredients: Silver (0.1 g/l),
Use biocidal products with care. Always read label and product information before use.
Reg. no. (BAuA): N-103365
Disposal
Only return empty containers for recycling. Dispose of liquid material residues at the collection point for old paints/lacquers, dispose of dried material residues as construction and demolition waste or as municipal or household waste.
EU limit value for the VOC content
this product (Cat. A/d): 130 g/l (2010). This product contains max. 110 g/l VOC.Substances of Content - Declaration
Mass
Polyacrylate resin, titanium dioxide, silicates, water, glycols, glycol ethers, additives, preservatives, biocides.
Customer Service Centre
Tel.: +49 6154 71-71710Fax: +49 6154 71-71711
e-mail: kundenservicecenter@caparol.de
International Distribution: Please see www.caparol.com